（2）Valve Products Standards Compliance

Jodith orders come from all kinks of countries, like Russia, America, German, Japan...Now, let me tell you about our product standard’s compliance.

Standards compliance:

Design and Manufacture: ANSIB16.34, API600, API6D, API603, BS1414, API602, BS1873, BS1868,MSS SP54, DIN 3356,DIN 3352, DIN 3356,.

Face to face (end to end): ANSIB16.10, API6D,

Flanged connection: 2"~24" to ANSIB16.5, 22", 26"~36"to MSS-SP-44 to API605 on Request 

Test and inspection: API598, API6D 

Butt welded end: ANSIB16.5

Gate valves

Jodith Gate valve refers to the valve whose closing member (gate) moves along the vertical direction of the center line of the access. Gate valve in the pipeline can only be used for full open and shut off, not for adjustment and throttling. Gate valve is a wide range of use of a valve, the general diameter of DN50 cutting device are used, sometimes small diameter cutting device is also used gate valve.

Jodith Gate valve is used as cut-off medium, in full open the whole flow through, at this time the media operation pressure loss is the minimum. Gate valves are usually used when they do not need to be opened or closed frequently and the gate is kept fully open or fully closed. Not suitable for regulating or throttling use. For the medium with high speed flow, gate vibration can be caused when the gate is partially opened, and the vibration may damage the sealing surface of gate and valve seat, while throttle will cause gate to be eroded by medium.

Look! Today we delivered two containers of industrial valves to our european customer.